Products

Cleaners & Ancillaries

The range of cleaners and ancillary products in the Valspar Refinish product portfolio ensure you will have all the tools required for any job you do.

Cleaners & Ancillaries product image

129 Wax & Grease Remover

129 Wax and Grease Remover is a solvent-based surface cleaner designed to remove a wide range of surface contaminants on bodywork.
The formulation efficiently removes common contaminants including grease, oil, wax, silicone, adhesives, tar, tree sap, insects, dirt, sanding residue, fingerprint oil, and dust.
129 Wax and Grease Remover is suitable for use on sanded and un-sanded substrates, OEM finishes and cured primers/sealers.

SIZE: 1L, 4L, 20L

SDS

139 Gunwash

139 Gunwash is a speciality blend of solvents designed to provide efficient and effective cleaning of single component and two component products from spray equipment.

SIZE: 20L

SDS

155 Surface Cleaner

155 Surface Cleaner is a solvent based surface cleaner designed to remove a wide range of surface contaminants on bodywork.
The ready-for-use formulation efficiently removes common contaminants including grease, oil, wax, silicone, adhesives, tar, tree sap, insects, dirt, sanding residue, fingerprint oil, and dust.
155 Surface Cleaner is suitable for use on sanded and un-sanded substrates, OEM finishes and cured primers/sealers.

SIZE: 1 Gal

SDS

170 Aqua Clean

170 Aqua Clean is a water based, low VOC, multi-purpose surface cleaner. It is designed for a variety of substrates including OEM finishes, automotive plastics and cured primers/sealers.
170 Aqua Clean removes common contaminants including grease, wax, silicone, adhesives, tar, tree sap, insects, dirt, and sanding residue. It is designed for use in the initial and final steps of surface preparation.

SIZE: 1 Gal

SDS

PR2 Plastic Adhesion Promoter

PR2 Plastic Adhesion Promoter is a single pack, ready-for-use, fast drying, adhesion promoting primer for common automotive plastics.
PR2 is compatible with Thermopolyolefin (TPO), Polyvinyl Chloride (PVC), Reaction Injection Molded Polyurethane (RIM), and Polypropylene (PPO) and is suitable for both interior and exterior components.
Plastic parts should be tempered for 45 minutes at 60°C before cleaning to assist in the removal of mold release agents.

SIZE: 1 Qt

TDS

SDS

 

T566 Accelerator

T566 Accelerator is an additive for selected Valspar Refinish polyurethane products. T566 is designed to accelerate touch dry, dry to handle and buffing time. It is especially useful in cooler climates or to increase job throughput.

T566 Accelerator is added at 1-2% of mixed product and is compatible with the following products (refer to the product technical data sheet for specific addition rates):

  • AC200MS MS Clear Coat
  • AC4400 HS Clear Coat
  • 862 Polyurethane Topcoat

Size: 1 Pt

TDS

SDS

Z777 Mid Coat Adhesion Promoter

Z777 Mid-coat Adhesion Promoter is a single pack, solvent based, ready-for-use adhesion promoter. It is designed for application over suitably prepared OEM substrates, 2K topcoats or primers to enhance topcoat adhesion and minimise surface preparation. Z777 can be over coated with 888C88 basecoat or 862 2K Polyurethane topcoat.

Size: 1 Gal

TDS

SDS